English
Ultra Plast and Qualipurge Range
ULTRA PLAST: SWISS QUALITY PURGING COMPOUND.
A full range of products for all your needs.
Eliminate your problems when changing color and/or material.
HOW DOES IT WORK?
Thanks to its particular composition, colour, incrustations, black spots, rust and any impurities will be softened, removed and ejected from the machinery.
An expanding and foaming agent makes it still more efficient, specially for the most difficult situations: machines with degassing and plasticizing accumulators.
Ultra Plast cleans at the temperature of the previously worked material and does not need any soaking time during cleaning cycle.
ADVANTAGES:
No waiting time during cleaning operation.
Safe and easy handling. Excellent efficiency.
Saves time for the cleaning operation.No raw material waste.
No smell: no unhealthy gas production.
No damage for your machines: no solvents, paraffines or abrasive material content. If used frequently, it protects steel from oxidation making cleaning operations easier and faster.
All components of Ultra Plast compound are safe according FDA. Certification according to 10/2011 for the contact with food or drinks.
ULTRA PLAST FOR POLYOLEFIN (PE AND PP), PVC, POM, EVA, PS, TPE, TPU, EVOH, ABS
Different grades according to your specific requirements:
QUALIPURGE PO-CS with the new developed active part for color/material change in injection (including hotrunners, can be injected into the mold). They can be used also on ABS and ASA.
POHCS specially developed for stack molds and molds for thin wall containers and caps.
PO-TPE specially developed for elastomers, like TPE, TPO and TPU.
PO-E, QUALIPURGE POE-CS and POE-S , mainly for extrusion and blow molding (EBM); they can be used also to clean only the screw on injection with particularly difficult colors (new organic pigments).
PO-LT: for processing temperatures between 80 °C and 160 °C.
ULTRA PLAST FOR MEDIUM TEMPERATURES: PC, PC/ABS, PS, ABS, SAN, PMMA
HIGH: it can be used from 190°C to 320°C. It’s suitable for SAN, PS and ABS.
HIGH-C and QUALIPURGE HIGH-CS, with the new developed active part for color/material change: both can be used from 250°C to 320°C. Suitable for screw/barrel and hotrunners (can be injected into the mold). Specially developed for PC, PC/ABS and PMMA. Their formulation avoid the “milky shadow”, a typical defect on transparent pieces after purging.
QUALIPURGE PO-PS can be used between 190°C and 320°C and it’s suitable for PS, PMMA and PC. This grade too will not leave the “milky shadow” on the pieces after the cleaning.
ULTRA PLAST SPECIFIC FOR PET PROCESSING: PREFORMS AND CAST FILM
Temperature : 250 – 320 °C
QUALIPURGE PET-CS and PET-CS2 with the new developed active part for screw/barrel and hotrunners (can be injected into the mold).
PAC for the barrier layer in preforms and cast film.
ULTRA PLAST FOR HIGH TEMPERATURE AND ENGINEERING PLASTICS
Suitable for PA, PBT, PEEK, PPS, PSU, PPO, GRIVORY HT, ULTEM, PEI, PES.
QUALIPURGE HT-CS, HT-S and HT-S2 with the new developed active part for screw/barrel and hotrunners (can be injected into the mold). They can be used for temperatures from 250°C to 420°C, without smell and smoke.
ULTRA PLAST ALL ROUNDER PURGING COMPOUND
Suitable for all the polymers processed between 140°C and 380°C (combined chemical and mechanical action)
ULTRA PLAST SP, SP+ are suitable for screw and barrel cleaning in injection machines and extruders.
ULTRA PLAST SP+ can be used also in hotrunner cleaning (can be injected into the mold).
ULTRA PLAST FC can be used without parameters’ modification. In blown film it does not break the film
ULTRA PLAST CONCENTRATES TO BE MIXED WITH YOUR PRODUCTION MATERIAL
Temperature : 120 – 400 °C
ECO-CE, CE-CS and ECO-CE-CS: for color and material change in extrusion and extrusion blow molding.
(send the technical data sheet of the polymer to be mixed, for approval)